Polyurethane Pneumatic Tubing 1/4" OD

Our company has been committed to the research and development, production, and sales of polyurethane products since its establishment. We have been engaged in the production and sales of polyurethane products for nearly 20 years. After years of development, we have a strong technical team, production team, and sales team, with 7 extrusion production equipment and multiple testing equipment. We are located in the same city as Wanhua, a large raw material manufacturer in China - Yantai, Shandong. So it has unique advantages in raw material procurement. Our Polyurethane Pneumatic Tubing 1/4 "OD is sold to multiple countries and regions including Brazil, France, Germany, Indonesia, Iran, and has received unanimous praise from customers.

1. Precautions during storage of Polyurethane Pneumatic Tubing 1/4 "OD
1) Control temperature and humidity: Due to the sensitivity of polyurethane materials to environmental temperature and humidity. It is recommended to store in a dry and ventilated environment, with an ideal temperature range of 5 ° C to 40 ° C.
Direct sunlight and proximity to heat sources should be avoided, as high temperatures and ultraviolet radiation can accelerate material aging, causing it to turn yellow and brittle.
2) Prevent deformation under pressure: The trachea should avoid heavy objects stacking or squeezing. Although polyurethane has elastic memory function, long-term exposure to heavy pressure or extreme bending may cause permanent deformation, affecting the flow of gas during use.
3) Keep clean: The storage area should be clean and dust-free to prevent dust, oil stains, or chemical solvents from coming into contact with the surface of the pipes. These pollutants may enter pneumatic components during ventilation, causing valve blockage or seal damage.
2.What should be noted when installing Polyurethane Pneumatic Tubing 1/4 "OD on a robot arm
1) Installation of inner lining: It is strongly recommended to install a dedicated inner lining at the root of the tracheal insertion joint.
This small component can effectively disperse the stress during bending and significantly prevent the pipe opening from cracking due to fatigue.
2) Adopt graded fixation: Do not only fix the two ends of the trachea. Multiple fixed points should be set on the robot arm, and drag chains or flexible cable trays should be used to guide the trachea.
The purpose of doing this is to evenly distribute the bending stress on a longer section of the trachea, rather than concentrating it entirely at the joint

Hot Tags: polyurethane pneumatic tubing 1/4" od, China, manufacturers, factory, customized, low price, made in China