PU Hose 8 X 5 mm 100m

Our company is located in Yantai, Shandong, the birthplace of polyurethane products in China. We have been committed to the production of polyurethane products for nearly 20 years, mainly producing polyurethane tubes, polyurethane wheels, polyurethane boards, polyurethane sieves, and other customized polyurethane products. After years of development, we have accumulated rich experience in producing PU Hose 8 x 5 mm with a 100m square area. We have 7 advanced extrusion production equipment and multiple testing equipment, and have a branch factory in Linyi, Shandong, a logistics hub in northern China. Welcome to visit the factory anytime

PU Hose 8 x 5 mm 100m is widely used in the industrial field due to its excellent performance. Its core features are excellent flexibility, wear resistance, and small bending radius. Generally used for compressed air systems such as pneumatic tools, automated machinery, air compressors, and connecting various pneumatic components (such as cylinders, solenoid valves). The applicable fluid is mainly air, occasionally used for water and non corrosive oils. Under the specified usage environment, the normal service life can reach more than 5 years.
To ensure safety and extend the service life of PU Hose 8 x 5 mm 100m, the following points should be noted in practical use:
1. Temperature control: It is essential to pay attention to the working environment temperature and fluid temperature. The working temperature range of this type of hose is usually between -40 ° C and+60 ° C, but it is recommended to maintain the temperature between -20 ° C and+40 ° C for long-term use. It is strictly prohibited to use it in environments that exceed the limit temperature, as high temperatures can cause the hose to soften and reduce its pressure resistance; Low temperature may lead to embrittlement and easy breakage.
2. Avoid contact with corrosive substances such as strong acids, strong bases, or strong polar solvents, as these chemicals can corrode hoses and cause them to rupture.
When connecting the quick connect connector, be sure to insert the trachea into the bottom of the connector until it can no longer be pulled, otherwise it is easy to leak or fall off.
When disassembling, it is necessary to first ensure that the pressure inside the tube drops to zero, then evenly press the release ring of the joint to the bottom, and then pull out the trachea. If the release ring is forcefully pulled before being fully pressed in, it will damage the trachea and joint.
5. Do not subject the hose to excessive stretching, twisting, friction, or scratches from sharp objects.

Hot Tags: pu hose 8 x 5 mm 100m, China, manufacturers, factory, customized, low price, made in China, Polyurethane Straight Air Hose, PU Bush, PU Straight Air Tube